background image

                                           

 

       warnings and cautions in this safety section.   

 

 

2.INTRODUCTION & SPECIFICATION 

 

INTRODUCTION: 

Includes new generation, 15-function, auto-ranging automotive diagnostic multimeter. Digital 

display gives accurate indication of component outputs. Large, easy to read high contrast display with bright, white 

backlight. Workshop-tough, durable bi-composite case with integral stand and auto power shut-off. High speed 

processing circuitry reads standard automotive parameters including duty cycle and  pulse width making this tool 

ideal for testing fuel injection systems. 

F

eatures auto-ranging, and data hold functions with overload protection on all 

ranges. Includes relative functions including Min/Max and Peak Hold. 

S

upplied with Inductive 

C

oupler, test probes 

and thermocouple in carry case. 

 

SPECIFICATION:

....................................................... 

Model No: VS-228       

Diode Check.........................................................Yes

 

Tach (RPM)…2-10cyl, 4-Stroke 60-9000 (x1)rpm, 

600

-12000 (x10)rpm         Back Light.............................................................Yes 

Dwell:.........................................................................................4/5/6/8cyl        Display Hold:........................................................Yes 

AC Voltage:....................................................600mV, 6V, 60, 600V, 

750V

        Auto Ranging:......................................................Yes 

DC Voltage:..................................................600mV, 6V, 60, 600V, 

1000V

        Inductive Coupler:................................................Yes 

AC Current:............ .............................................60mA, 600mA, 6A, 20A         Digits Height:...................................................20mm 

DC Current:..........................................................60mA, 600mA, 6A, 20A        Auto Power Off:....................................................Yes 

Capacitance: ..........10nF, 100nF, 1000nF , 10

μ

F, 100

μ

F, 10mF, 60mF           Low Battery Indicator:..........................................Yes 

Frequency:....................................................................0.001Hz-9.99MHz         Batteries (supplied):.....................................9V (PP9) 

Duty Cycle:............................................................................... 1.0-99.0%         Hi-Impact Case:....................................................Yes 

Pulse Width:...............................................................................0.1-10ms                Size (L x W x D):..............................190 x 90 x 62mm 

Resistance:..............................600

Ω

, 6k

Ω

, 60k

Ω

, 600k

Ω

, 6M

Ω

, 60M

Ω

       Weight(Include 9V Battery):.............................. ..400g 

Continuity:.................................................<50

Ω

  Continuity Buzzer 2kHz          

Temperature:...........................................-20 to +760

°

C, -4 to +1400

°

F         

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

However, the meter is protected to 250 volts. 

  

 

 

 

 

 

Содержание VS-228














Отзывы: