8. PARTS
7.5.2. Remove the old fuse from its holder by gently pulling it out. Take care not to touch any other internal parts of
the analyser.
7.5.3. Install the new fuse into its holder by gently pushing it in.
Note: Always use a fuse of the correct size and value.
Fuse Ratings:
20A/250V, 6.3 x 32mm fast acting ceramic type for the 20A range.
0.5A/250V, 5 x 20mm fast acting ceramic type for the 800mA range.
7.5.4. Replace the rear cover and secure with the six screws.
WARNING!
To avoid electric shock, do not use the analyser until it has been fully re-assembled.
Item Part No. Description
1. VS-228.01 TEMPERATURE PROBE
2. VS-228.02 INDUCTIVE PICK-UP
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications
and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycle centre and disposed of in a manner which is
compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective
way.
Contact your local solid waste authority for recycling information.
Battery Removal.
WARNING!
To avoid electric shock, disconnect the test leads from any source of voltage
before removing the battery cover.
Disconnect the test leads from the meter.
