background image

6/25/2015

Manual, WL-100.doc

P

OWERED PRODUCTS

 

W

ARRANTY

ONE YEAR LIMITED WARRANTY 

The manufacturer warrants for the original purchaser against defects in materials and workmanship under normal use 
one year after date of shipment (not to exceed 15 months after date of manufacture).  Any part that is determined by 

the manufacturer to be defective in material or workmanship and returned to the factory, shipping costs prepaid, will 
be, as the exclusive remedy, repaired or replaced at our option.  Labor costs for warranty repairs and/or modifications 

are not covered unless done at manufacturer’s facilities or pre-approved in advance by the manufacturer.  Any 
modifications performed without written approval of the manufacturer may void warranty.  This limited warranty gives 

purchaser specific legal rights which vary from state to state. 
All specifications are subject to change without notice. 

LIMITATION OF LIABILITY 

To the extent allowable under applicable law, the manufacturer’s liability for consequential and incidental damages is 
expressly disclaimed.  The manufacturer’s liability in any event is limited to, and shall not exceed, the purchase price 

paid.  Misuse or modification may void warranty. 
Warranty does not cover labor or consequential damages including, but not limited to, business interruption costs, lost 

profits, or lost business opportunities. 

WARRANTY DISCLAIMER 

The manufacturer has made a diligent effort to accurately illustrate and describe their products.  However, such 

illustrations and descriptions are for the sole purpose of identification, and do note express or imply a warranty that 
the products are merchantable or fit for a particular purpose, or that the products will necessarily conform to the 
illustrations or descriptions. 
The provisions of the warranty shall be construed and enforced in accordance with the Uniform Commercial Code and 
laws as enacted in the State of Indiana. 

DISPOSITION 

Our company will make a good faith effort for prompt correction or other adjustment with respect to any product that 
proves to be defective within the Limited Warranty Period.  Warranty claims must be made in writing within said year.

 

V

ESTIL 

M

FG

.

 

C

O

./T&S

 

E

QPT

.

 

C

O

.

16 of 16 

Содержание WL-100

















Отзывы: