2
8.1 Top
Panel
8.2 Rear
View
8.3
Cutting Head Section
Section 9 – VRX-2000 Packing Contents
Section 10 – Assembly and Set-up
10.1 Platter
Assembly
10.2 Ioniser
Assembly
10.3
Tracking Arm/Counter Weight Assembly
10.4
Cutting Stylus Assembly
10.5
Cutting Head Assembly
Section 11 – Final Adjustments
11.1
Stylus pressure adjustment
Section 12 – Recording Procedures
12-1 Cutting
procedures
12-2 Troubleshooting
Section 13 – Playback
Section 14 – Copyright Issues
x
Vestax Customer Service Center (c.f. Section 4)
x
Official Vestax Investigation Form (c.f. Section 4)
Section 3: BASIC VRX-2000 SET-UP AND COMPONENTS
3.1 SET UP
Please place this unit on a solid, stable and horizontal surface. An unstable surface may pick up external
vibrations, and these unwanted sounds will be recorded on the vinyl. Unstable surfaces may also cause platter
rotation fluctuations.
Please avoid sunlight, dust, humidity, and do not place the unit near heating appliances or sources of heat. If
dust gets on the vinyl recording it will cause additional noise on recording sound.
Please do not place the VRX-2000 near loudspeakers, as any sound with enough volume will be recorded on
the vinyl.
Please also never place the unit near TV, radio, or other equipment which generates electric or magnetic fields.
If the unit is located in such a place it may have an effect on the cutting head and you will not achieve the best
result.
3.2 HANDLING
The VRX-2000 is very heavy. It is recommended that extreme care is taken when moving the unit, and that it is
moved by more than one person. If you are going to ship the unit, please use original packing material.
When transporting, please be sure to disassemble the following parts from the main unit:
1. Cutting
head
