50mm
Slip mat
Place the slip mat on the platter. Then place a record on
top of the slip mat. By using a slip mat, it becomes
possible to stop a record board by hand during rotation of
a platter or to make it reverse. Moreover, if an optional
slip-sheet is set and used, it will take effect more.
Cartridge Installation
(1)Make sure that you follow the instructions included with
your cartridge.
(2)Connect the lead wires to the respective terminals.
Industry standard cartridges come with color-coded
wires. Make sure that you match these colors correctly.
Red (R+) Right Green (R-) Right Channel -
White (L-) Left Blue (L-) Left Channel -
(3)The overhang of your cartridge needs to be adjusted to
best suit the A.S.T.S tone arm. For best tracking and
stylus pressure a distance of 50mm (as shown) should
be set.
(4)Insert the head shell into the front part of the tone arm.
Turn the looking ring in the direction shown below until
the head shell is firmly fixed in place.
NOTE
If using a lightweight cartridge, we suggest the use of
the shell weight enclosed.
NOTE
To avoid premature damage to the stylus take care to
avoid touching it during any adjustment(s).
-10-
Top:Record disc side(Printed side)
Bottom:Slip surface side
NUT
HEADSHELL
(OPTION)
SHELL WEIGHT
(OPTION)
CARTRIDGE
STYLUS
SCREW
LEAD WIRE
All manuals and user guides at all-guides.com
