ADJUSTMENT
-12-
①Install the cartridge, headshell and balance weight to the
tonearm.
②Adjust the dynamic stylus pressure knob ob the tonearm
to Zero.
③Carefully release the tone arm from the tone arm clamp.
④Turn the balance weight clockwise or counterclockwise
until balanced horizontally.
⑤Return the tonearm to the armrest.
⑥Loosen the dynamic Stylus pressure adjustment knob
and pull it to the position with appropriate needle
pressure, tighten the knob.
NOTE
Be careful not to touch your finger to the stylus tip
during the adjustment.
NOTE
Exceeding stylus pressure recommendations may
couse skipping and/ or reduce stylus life.
NOTE
Be sure to tighten the Tonearm Height Screw well. The
stylus may jump/skip if the height setting is not secured.
NOTE
In case the balanceweight is moved, do the adjustment
of horizontal zero balance again.
Adjustment of Horizontal Zero(0) Balance
In case of the height of Tone-arm is needed for
adjustment, it is possible to adjust the height by loosening
the Tone-arm Height Fixed Screw. The adjustment range
is 9mm at the maximum. In case of 16mm cartridge height
→ Adjustment of tone-arm height do not need. In case of
25mm cartridge height → Adjustment of tone-arm height
need to set 9mm(MAX).
Adjustment of Tone-arm Height
Dynamic Stylus Pressure
Adjustment knob
Dynamic Stylus Pressure
Adjustment knob
a)When the balance weight and cartridge are
balanced, the tone arm is held horizontal.
b)Excessive forward advancement of the balance
weight causes the cartridge side to be lowered.
c)Excessive backward retreatment of the balance
weight causes the cartridge side to be raised.
Loosen
Loosen
Slide and adjust
Slide and adjust
Tighten
Tighten
Screw Driver
COIN
Arm Height
Adjustment Screw
Loose
tTghten
Loose
Tighten
All manuals and user guides at all-guides.com
