Safety precautions
·
Please note that
Vestamatic
VestaFunk MS16R
/
MS16M
require an
operating voltage of 230 V
W
, 50 Hz. Work on the 230 V
W
mains may only be
carried out in accordance with VDE 0100 and by a professional electrician.
·
Check the control for any signs of damage immediately after unpacking. Do not
start up the control, if you notice any damage on the device or its connections. If
there is damage due to the shipping, please notify the supplier immediately.
·
The control was designed for correct use as described in the operating instruc-
tions. Any changes or modifications thereof are not permissible and will result in
loss of all warranty claims.
·
If safe operation of the control or the awning can not be guaranteed, the control
must be turned off immediately and protected against unintentional operation.The
same applies for work on windows or roller shutters that are operated by this
control.
·
Constructional characteristics of the building such as metallic areas or thick and
heavily armored ceilings and walls can reduce the reach of transmitter or receiver
of the radio control system. Other devices using the same radio frequency (433,92)
can cause cross-interferences. For safety precautions, Vestamatic radio control
functions will not be executed unless the device undoubtedly indentifies the
signals.
·
In order to achieve maximum reception quality, the above precautions are to be
observed. Do not operate two or more radio receivers directly adjacent to each
other. We recommend a minimum distance of 30 cm between radio receivers.
G
- 18 -
Installation and Operating Instructions
VestaFunk MS16
83201911 H1.qxd 04.04.01 11:20 Seite 17
