Subject to modifications.
© Vestamatic GmbH
Art.-Nr.:
3060 001 GB 4518 A06 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach
• www.vestamatic.com
9/10
G
IF SMI RS-485 DIN
In the
“Send/Receive”
section, you can monitor the communication between PC and
IF SMI RS-485 module. You will see the Transmit and Receive data stream.
7.5 Send / Receive
On the
“Motor ID”
tab-sheet, you will find the “Motor ID” based com-
mands. The motor you want to address, can be selected with the spin edit
box (in the dark gray part, behind Motor ID). Motor ID can be set from “0” to
“15”. Next, press a command button, like “GET_SERIAL”, “GET_PARAM”,
“SET_SMI_ID”, “GET_POS1”, “SET_POS1”, “GET_POS2”, “SET_POS2”
or “GETDETSTAT”.
REMARK:
Some commands need additional parameters. See section
“6. Protocol”
for detailed information.
7.4 Motor ID based commands
On the
“Motor Mask”
tab-sheet, you will find the “motor mask” based
commands. With the checkboxes 15 to 0 you can select which motor(s)
you want to address, or simply select “All”, to address all motors. Next,
press a command button, like “UP”, “DOWN”, “STOP”, “STEP_UP”,
“STEP_DOWN”, “SET_POS”, “SET_TILT”, “SET_POS_STEP_UP”,
“SET_POS_STEP_DOWN”, “GOTO_POS1” or “GOTO_POS2”.
REMARK:
Some commands need additional parameters. See section
“6. Protocol”
for detailed information.
7.3 Motor Mask based commands
