43
43
4
G
Setting up Cloud Account & Enrolling Devices
Operation
-
Enrolling Devices to
Main Controller
STEP 10.
BYPASS
-
This function allow the Device to be disen-
gage from the Alarm system. Please note, if selected
ON, the Bypass feature will only apply for a single peri-
od of alarm arming. Once the alarm has been dis-
armed, the Bypass will reset to OFF mode. Should you
require the device to be bypassed again, this must be
selected ON before arming is set again.
STEP 11.
1.
Disarm response
2.
Full Arm response
3.
Home response
4.
Trigger Response
The following are selectable options which represents
how each devices will behave and perform within the
Alarm system. Select each options accordingly to their
behaver.
For example,
if a
Motion sensor
or
Door contact
Device
is installed at an entry area, it is recommended
that a delay time period is selected in the two follow-
ing menu
’
s.
This will give the operator time to enter and disarm
the alarm system.
Also, this applies to the exit time. Again when leaving
the property, you will need a delay time to exit.
By Default, alarm system exit and entry time is 20 sec
When all selectable options have been entered be sure
to click
SUBMIT
PLEASE NOTE
-
For every device that is not as-
signed to an entry point be sure to select
Instant
activation for all other.
Please repeat step 11, for each individual Devic-
es enrolled in the Main controller.
41
