51
2.
Select whether you want to turn On or Off the Power Switch group
3.
Select the duration the Power Switch group should be turned On or Off.
Switch Zone:
1.
Select the zone of the single Power Switch you want to control.
2.
Select to turn On / Off / Toggle the Power Switch.
3.
Select the duration the Power Switch should turn on/off.
Switch Zone %:
1.
Select the zone of the single Dimmer you want to control.
2.
Set the power output level of the Dimmer.
3.
Select the duration the Dimmer should change power output level.
Request Image Zone:
The PIR Camera at specified zone will take a picture.
Request Video Zone:
The PIR Video Camera or IP Camera at specified zone will take a
video.
Request All Media:
All PIR Camera/Video Camera/IP Camera in the alarm system will be
requested to take picture or record video clip.
Apply Scene:
Select the scene to be activated. See “Scene Setting” below for detail.
Mode Change To:
The Control Panel will change to selected system mode.
Step4.
Click “Submit” to confirm the rule setting.
Scene Setting
Step1.
Click “
Edit
” to configure setting for the selected scene number. You will enter edit page.
Step2.
Set the Execution Actions, up to 3 actions can be included in a scene.
Switch Group:
1.
Select the Power Switch Group you want to control
2.
Select whether you want to turn On or Off the Power Switch group
