31
6. Device Management
This page for you to learn in, edit, delete and control all the accessory devices. A total of
40
devices can be learnt into the system, including Up to
6
PIR Cameras and PIR Video Camera,
and
6
IP Cameras. For ZigBee devices, up to
10
ZigBee Routers can be included in the Control
Panel.
6.1. Learning
Step1.
Under Disarm Mode, press “
Start Learning
”. The Control Panel will enter learning
webpage. The Control Panel LED 1 will flash green.
Step2.
Press the learn button on your device, for ZigBee device, press and hold the learn button
for about 10 seconds (please refer to device manual for detail) to transmit a learn code.
For IP Camera, connect the IP Camera to local area network before entering learning
mode.
Step3.
If the Control Panel receives the learn code it will emit 2 short beeps, click the “
Refresh
”
button to display the device information on webpage. If the Control Panel emit 1 long
beep instead, it means the device has already been learned into the Control Panel.
