Vessel Stat Clean F120S-E, Инструкция по эксплуатации

Страница: 14 / 16

14
„ Maintenance
When cleaning the filter (Option)
After being used for a long time with a filter available as option, dust adhered to the filter could
lower ionizing performance or cause dust to fly around. Be sure to periodically clean or replace the
filter.
1) Before cleaning the filter, stop operation of the F120S-E, turn off power.
2) Unplug the AC adapter or pull out the wires from input/output terminals.
3) Take out the filter cover.
4) Remove and clean the filter. Make sure the falter is completely dry before reuse. Installing the
filter while still wet may damage the F120S-E.
5) Wipe off the dust adhered on the filter cover with a cloth. Dust may also be on the outside
and/or inside the filter cover, so use a dry and soft cloth to wipe dust off.
6) Mount again the filter and the filter cover.
CAUTION
CLEANING
If the filter is dirty, it could lower the static erasing performance or cause
dust to fly around. Be sure to clean the contaminated parts according to
your service condition.
When replacing the filter
In the case that the dust cannot be removed even after cleaning, replace it with a new one.
Remove the filter cover with the same procedure as for cleaning and then replace the filter with a
new one.
Consumables
Electrode needle unit: F-120H Filter set: F-120FS F-120FS
Filter: F-12EF Front cover: F-120FC F-120FG