Vessel IPC20-E, Инструкция по эксплуатации

Страница: 43 / 64

15
„ Installation
Installation Method
When installing this unit, place it on a level, strong, and smooth, flat bench.
WARNING
Remember
To keep the unit from falling over, do not climb on the working surface or
place heavy objects on it.
Remember
When installing the IPC20-E, place it on a level, strong, and smooth, flat
bench.
It can be damaged and malfunction if it falls.
CAUTION
Check the following, being aware of the weight of the product.
･
Be sufficiently careful that no part of the body, especially fingers and toes,
will be caught underneath the product while it is being installed or moved.
･ Make sure the product does not fall over while it is being installed or
moved.
･ Do not move the product while an object is set on its hood. The object
could fall off of the hood.
Electrical power wiring
WARNING
Remember
Use IPC20-E only with 230V AC. Use of other voltage may result in fire and
electric shock.
Remember
To prevent electrical shock accidents, be sure to unplug the power cord from
the outlet before performing any wiring.
Remember
To prevent electrical leaks, electrical shock, and fire accidents perform the
wiring work in accordance with electrical equipment technology standards
and in-house wiring provisions.
Remember
Make sure the switch is turned to ( 〇 ) when plugging the power cord into
the outlet.
Check the specifications
Checks to make sure the specifications of the supplied power make the unit’s power
specifications.
Wiring circuit breaker
Use a wiring circuit breaker to prevent overloading. It is also recommended that a ground-fault
interrupter be installed.