Vessel IPC20-E, Инструкция по эксплуатации

Страница: 33 / 64

5
„ For Your Safely
WARNING
Prohibited
To prevent fires, only use the specified rated power source.
Painting Prohibited
Use as a painting booth is prohibited. Do not perform painting
work in it.
Peering Prohibited
Do not peer into the end of the air nozzle. The sensor will detect
your presence and blast out compressed air, which could strike
your eyes or face.
WARNING
Disassembly Prohibited
Do not remove components, or modify or unreasonably
disassemble or assemble the product.
･ This product is manufactured in accordance with safety and
performance standards, so removing components or
modifying the product is dangerous.
･ Depending on the type of trouble, the customer might not be
able to handle it, so always contact the store where the
product was purchased.
Acceleration Prohibited
Do not use an inverter to accelerate operation.
Acceleration could overload the motor and pose a hazard in
terms of the strength of rotating parts, etc. In addition,
deceleration could cause a drop in blow volume, which could
result in insufficient motor cooling.
Remember
Be sure to observe the following to prevent electrical shock
accidents.
･ Be sure to unplug the power cord from the outlet before
performing any wiring.
･
Be sure to ground the ground wire.
WARNING
Remember
Be sure to turn off the power when the thermal protector operates and the
operation stops.
When the motor becomes overloaded, the thermal protector automatically
operates to stop the motor, but since this is an automatic recovery type motor,
if the power is left on, the motor could suddenly automatically restarting
operating and leads to an accident.
Turn off the power switch and main power supply before looking for the cause
of the problem.
Do not restart operation before identifying and eliminating the cause of the
problem.
Remember
Perform the processing quickly without letting dust accumulate.
Depending on the conditions, dust could present a fire or explosion hazard.
Remember
Be sure to unplug the power cord from the outlet before performing any
maintenance or inspection work.