12
■
Static charge voltage Measurement
Continuous mode for static charge voltage measurement
1) Face this device toward a charge-free space, and press the power button for 3.5 to 4.5 seconds.
When the power turns on and “3” appears on the LCD display, release the button. A “beeping”
sound is made to indicate that the “auto power off function” has been canceled, and the
“continuous measurement mode” has been entered.
2) The bar graph, scale, display range, polarity, measurement value, unit (kV), battery level and
“A.ON” appear on the LCD screen. At the same time, the red LED for the cross mark on the front
of the product turns on, and the measurement state is activated.
Always check the battery level at this time. Refer to “Battery level display” for details on the
battery level.
3) When finished with measurement, turn the power button. A single beep sounds, the power turns
off and all displays turn off.
Continuous mode for static charge (voltage) measurement
REMEMBER
Eye-02 cannot be turned off without pressing POWER button in continuous
measurement mode. Confirm that power is turned off by observing the
disappearance of all indicators. If power is not turned off, the battery will be
drained completely.
* Eye-02 cannot return to this mode automatically, even if it is turned on again after turning off in
continuous mode. For going into continuous mode, the operation described in “Continuous mode
for static charge voltage measurement” is should be carried out when power is turned on.
