- 53 -
main menu on the situation display before entering setup mode.
Display orientation
Choose the orientation of the display when this profile is activated. The
orientation can be Heading-Up, North-Up or Use Default. If you select
Use Default then the default display orientation (determined in the
Display Settings Group) will be used. This allows you to override the
default for one or more profiles, for example setting the default to
Heading-Up but overriding it to be North-Up when anchored.
Target speed filter
This specifies the minimum SOG (in knots) that a target must be
moving to be included in the target list. Targets moving slower than this
speed will be filtered from the target list and will not appear.
Use this filter to eliminate slow or stationary targets from the target list.
Alarms are not triggered for filtered targets.
The total count of filtered targets is displayed on the situation display.
Selecting “
OFF
” disables the target speed filter.
I
f this setting is higher than the “CPA alarm - Target Speed” setting a
warning is displayed to indicate you may be filtering more targets than
you intend.
It is not recommended to set this value too high since it may filter
out all targets and alarms.
Target range filter
This specifies the maximum range (distance in nautical miles) for a
target to be included in the target list. Targets farther away will be
filtered from the target list and will not appear.
Use this filter to eliminate distant targets from the target list. Alarms are
not triggered for filtered targets.
The total count of filtered targets is displayed on the situation display.
Selecting “
OFF
” disables the target range filter.
It is not recommended to set this value too low since it may filter
out all targets and alarms.
