manualshive.com logo in svg

VESPA LXV 125 3V ie 2013, Руководство пользователя

Поделиться
Скачать
VESPA LXV 125 3V ie 2013 Скачать руководство пользователя страница 70

· Salinity and humidity of the atmosphere: marine areas, hot and wet weather.

WARNING

. Prevent deposits from remaining on the bodywork, industrial and pollutant
residual dust, tar spots, dead insects, bird droppings, etc.

· Do not park the vehicle under the trees. In some seasons, in fact, residues,
resins, fruits or leaves may fall from the trees, containing chemicals that are
harmful to the paintwork.

CLEANING CHROME-PLATED PARTS

After cleaning chrome-plated parts, polish them with a specific product for chrome-
plated, aluminium or stainless steel surfaces. To prevent corrosion, apply a protective
spray on all the metal surfaces, including chrome- and nickel-plated ones. Apply spray
oil and wax with moderation and make sure to wipe off excess product immediately.

CAUTION

NEVER APPLY OIL AND WAX ON RUBBER AND PLASTIC PARTS.

CAUTION

CHECK THAT THERE IS NO OIL OR WAX ON THE TYRES. BEFORE USING YOUR
SCOOTER TEST ITS BRAKING EFFICIENCY AND BEHAVIOUR ON A BEND.

70

3 Maintenance

Содержание LXV 125 3V ie 2013





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды