manualshive.com logo in svg

VESPA LXV 125 3V ie 2013, Руководство пользователя

Поделиться
Скачать
VESPA LXV 125 3V ie 2013 Скачать руководство пользователя страница 30

02_11

CAUTION

DO NOT CARRY OUT THESE OPERATIONS IN CLOSED AREAS SINCE EX-
HAUST GASES ARE TOXIC.

CAUTION

DUE TO THE HIGH TEMPERATURES THE SILENCER CAN REACH, ALWAYS
TAKE CARE, WHEN PARKING THE VEHICLE, THAT THE SILENCER DOES NOT
COME INTO CONTACT WITH FLAMMABLE MATERIALS, TO AVOID SERIOUS
BURNS.

Precautions

CAUTION

NEVER STRESS THE ENGINE AT LOW TEMPERATURES IN ORDER TO AVOID
POSSIBLE DAMAGE. BE CAREFUL NEVER TO EXCEED THE MAXIMUM SPEED
WHILE RUNNING DOWNHILL, IN ORDER TO AVOID DAMAGING THE ENGINE.
IN ANY CASE, IN ORDER TO PRESERVE THE ENGINE FROM PROLONGED
OVERREVVING, THE REVOLUTION LIMITER WILL BE ACTIVATED IF THE EN-
GINE SPEED EXCEEDS THE ESTABLISHED THRESHOLD.

WARNING

AFTER A LONG DISTANCE COVERED AT THE MAXIMUM SPEED, DO NOT STOP
THE ENGINE IMMEDIATELY, BUT LET IT RUN AT IDLE FOR A FEW SECONDS.

30

2 Use

Содержание LXV 125 3V ie 2013





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды