manualshive.com logo in svg

VESPA LXV 125 3V ie 2013, Руководство пользователя

Поделиться
Скачать
VESPA LXV 125 3V ie 2013 Скачать руководство пользователя страница 52

Sealed 12V/6Ah

Long periods of inactivity

Battery performance will be poor if the vehicle is not used for a long time. This is the
result of the natural phenomenon of battery discharging, and may be due to residual
absorption by vehicle components with constant power consumption. Poor battery
performance may also be due to environmental conditions and the cleanliness of the
poles. In order to avoid difficult starts and/or irreversible damage to the battery, follow
any of these steps:

- At least once a month

 start the engine and run it slightly above idle speed for 10-15

minutes. This keeps all the engine components, as well as the battery, in good working
order.

- Take your vehicle to a garage (as indicated in the «Vehicle not used for extended
periods» section) to have the battery removed. Have the battery cleaned, charged
fully and stored in a dry, ventilated place. Recharge 

at least once every two

months

.

N.B.

THE BATTERY MUST BE CHARGED WITH A CURRENT EQUAL TO 1/10 OF THE
RATED CAPACITY OF THE BATTERY AND FOR NOT LONGER THAN 10 HOURS.
CONTACT AN AUTHORISED SERVICE CENTRE TO CARRY OUT THIS OPERA-
TION SAFELY. WHEN REFITTING THE BATTERY MAKE SURE THE LEADS ARE
CORRECTLY CONNECTED TO THE TERMINALS.

WARNING

DO NOT DISCONNECT THE BATTERY CABLES WITH THE ENGINE RUNNING,
THIS CAN CAUSE IRREPARABLE DAMAGE TO THE VEHICLE'S ELECTRONIC
CONTROL UNIT.

52

3 Maintenance

Содержание LXV 125 3V ie 2013





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды