![background image](http://html1.mh-extra.com/html/ves/t-line-120/t-line-120_operation-and-maintenance-manual_1008687004.webp)
4
www.ves.co.uk
t-line
Extract Units
Immediately upon receipt of goods, check for possible damage in transit. Also check to
ensure that any ancillary items are included. These will be supplied fi ed or taped to the
unit (in the case of small items). In the event of any damage having occurred or if any item
is found to be missing, it is essen al to inform VES Andover Ltd. within
3 working days
of
delivery, quo ng the sale s order (SO) number, and the unit type as found on the unit
nameplate. A er this period VES Andover Ltd. will be unable to accept any claim for
damaged or missing goods.
Receipt of Goods
When moving the unit, handle with care and in such a manner limi ng damage to the
casework. Par cular care must be taken when moving weatherproof units, any damage to
the external powder coat finish may reduce the ability to resist corrosion. Units are to be
rigged and li ed using spreaders, taking into account the weight of the unit, li ing gear
should be arranged so as not to bear on the casework.
Installa on
Safety for the en re system must be considered when installing the unit and it is the
responsibility of the installer to ensure that all of the equipment is installed in
compliance with the manufacturer’s recommenda ons, with due r egard to the current
HEALTH AND SAFETY AT WORK ACT
and conform to all relevant statutory regula ons.
Precau ons should be in place so that in the unlikely event of component failure the risk of
personnel injury is reduced. For op mum unit performance, careful considera on must be
paid to the loca on of the unit in rela on to the ductwork and associated items; i.e placing
the unit directly adjacent to a bend in the ductwork will impede airflow and reduce
performance.
Duct Connec ons
Li ing and Connec ng
to Duct
Cau on
3
Important
The unit should NOT be li ed by handles, lids, housings, sha , motor or drive.
Only experienced engineers should undertake this work.
Secure li ing cable through the li ing lugs.
Ensure fan plate is securely in place before
li ing the unit.
It is recommended that the unit is li ed
using the supplied li ing lugs.
(For illustra on
purposes only)
3
4
Recommended only with fi ed
turning vanes
Recommended
Recommended
Fig.
1
Fig.
2
Important
An Inverter Speed controller is required for the opera on of this fan