11
ORIGINAL INSTRUCTIONS
VES Andover Ltd Eagle Close Chandlers Ford Ind. Est. Eastleigh Hampshire SO53 4NF
Tel: 023 8046 1150 Fax: 023 8026 1204 E-mail: [email protected] Web: www.ves.co.uk
EVH Hybrid Ventilation Unit
Installation, Operation and Maintenance Manual
Maintenance
6
Before attempting to carry out any work on VES units, all accompanying documentation
including warning labels on the unit must be referenced.
Should it be necessary to remove any component, ensure they are secured into position once
reinstalled. It is critical that after any maintenance work has been conducted that all
components removed/replaced be refitted correctly by a competent engineer.
Before attempting to carry out any maintenance work, investigative or repair work on our
units, the unit
MUST BE COMPLETELY ISOLATED
from its electrical supply. Ensure a minimum
of two minutes after electrical disconnection before removing access panels. This will allow
any moving parts to come to a complete standstill.
Care should also be taken when accessing external units as the wind and elements may cause
moving parts to ‘windmill’.
In general, this series of units require little maintenance. In the unlikely event of component
failure, spares are available from stock at VES Andover Ltd.
When accessing the unit ensure the access panels are handled/opened in a controlled manner
so as to avoid damage to the unit or injury to personnel. This is particularly important with
bottom access units. Ensure the AHU has come to a complete stop before attempting any work
on the unit
Ecovent
®
EVH
units feature plug & socket connections to allow easy removal/replacement of
key components. Depending on the plug type, separate the plug connection by hand (tools not
required) by either lifting the locking lever or pressing the top/bottom clasp mechanism to
open .
Plug & socket operation
Fig.
12 13
Important
Warning
Caution
12
Important
13
12
13
On reconnection, the assembly features a locating lug to ensure correct orientation. Once
rejoined, lock the connection together again using the corresponding system as shown.
Note the plugs are handed and forcing an incorrect connection may result in damage to the plug.
Caution
To separate the assembly, hold the plugs to pull them apart.
DO NOT
pull the cables.
Plug & socket operation
Fig.
14
