![Vertu ASCENT X Скачать руководство пользователя страница 77](http://html1.mh-extra.com/html/vertu/ascent-x/ascent-x_user-manual_1008417077.webp)
76
Settings
Using your Vertu phone as a modem
To connect to the internet by using your Vertu phone as a modem:
1. Check that Vertu PC Suite is installed on your computer. For information on
installing Vertu PC Suite, see
.
2. Connect your Vertu phone to your computer using the data cable or Bluetooth.
For information on connecting your Vertu phone to a computer using the data
cable, see
. For information on setting up a Bluetooth
connection, see
3. If you are using the data cable, select
PC Suite
in
Select USB mode:
field.
4. Start Vertu PC Suite on your computer.
5. Click on the
Connect to the Internet
icon.
6. Click the
Configure
button.
7. Click the
Next
button.
8. Select your network operator from the list. then click the
Finish
button.
9. Click the
Connect
button.
10.Click the
Disconnect
button when you have finished your browsing session.
Modifying packet data settings
To modify packet data settings:
1. From the Home screen, select
Menu
>
Settings
>
Connectivity
.
2. Select
Packet data
>
Packet data settings
.
3. Modify the access point settings as required.
Enabling high speed packet access
To enable high speed packet access:
1. From the Home screen, select
Menu
>
Settings
>
Connectivity
.
2. Select
Packet data
>
HS packet access
.
3. Select
Enabled
.
GPS
For information on GPS settings, see
Setting up an external GPS receiver
USB data cable
You can use the USB data cable in the following ways:
• To connect your Vertu phone to a computer using Vertu PC Suite. For further
and
• To connect your Vertu phone to a printer supporting PictBridge.
• To connect your Vertu phone to a computer for the phone to be used as a USB
storage device.
If you always use the USB data cable for the same purpose, you can select this in the
settings on your Vertu phone. If you use the USB cable in different ways, you can set
the phone to request the USB usage mode each time it is connected to a device using
the cable.
To set the USB mode:
1. From the Home screen, select
Menu
>
Settings
>
Connectivity
.
2. Select
USB data cable
.
3. Select one of the following settings:
•
Ask on conn.
- to prompt for the USB usage mode whenever connecting.
•
PC Suite
- to always connect using PC Suite.
•
Printing & media
- to always connect for printing.
•
Data storage
- to always connect in data storage mode.
Call
For information on call settings. see
Содержание ASCENT X
Страница 1: ...VERTU ASCENT X User Guide...