VERTO 52G206, Инструкция по эксплуатации, Страница: 11 / 88

11
GWARANCJA I SERWIS
Warunki gwarancji oraz opis postepowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny
GTX Service
tel. +48 22 573 03 85
Ul. Pograniczna 2/4 fax. +48 22 573 03 83
02-285 Warszawa e-mail service@gtxservice.pl
Sieć Punktów Serwisowych do napraw gwarancyjnych
i pogwarancyjnych dostępna na platformie internetowej
gtxservice.pl
Grupa Topex zapewnia dostępność części zamiennych oraz
materiałów eksploatacyjnych dla urządzeń i elektronarzędzi.
Pełna oferta części i usług na gtxservice.pl . Zeskanuj kod QR i wejdź:
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
MITRE SAW
52G206
CAUTION: BEFORE USING THE TOOL READ THIS MANUAL CAREFULLY
AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
PRECAUTIONS:
• Do not use damaged or deformed cutting blades.
• Replace table insert when it is worn out.
• Use only cutting blades that are recommended by the
manufacturer and comply with the standard EN 847-1.
• Do not use cutting blades made of high speed steel.
• Use personal protection measures, such as:
– earmuff protectors to reduce risk of hearing damage,
– eye shield,
– respiratory system protection to reduce risk of harmful dusts
inhalation,
– gloves for cutting blades maintenance (hold cutting blades by
holder whenever possible) and other rough materials.
• Connect dust extraction system when cutting wood.
SAFE OPERATION:
• Match cutting blade with material that you plan to cut.
• Never use mitre saw for cutting materials other than specified by
the manufacturer.
• Do not use the saw without guard or when the guard is blocked.
• Ensure that saw arm is well fixed when making a mitre cut.
• Floor close to the machine should be kept tidy and without loose
materials like scobs and other wastes.
• Provide appropriate top or spot lighting.
• Machine operator should be trained for use, operation and
working with the machine.
• Use only sharp cutting blades. Observe maximum speed marked
on the cutting blade.
• Ensure that spacing washers and spindle rings are used
accordingly to the manufacturer instructions.
• If the mitre saw is equipped with laser, replacement with laser of
another type is forbidden. Repairs should be carried out by the
manufacturer or authorized representative.
• Before starting to work always ensure the machine is fixed to a
bench.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of operational injuries.
SAFETY RULES FOR LASER DEVICE
Laser device used in the power tool design is the class 2 with maximum
power below 1mW and wavelength 650 nm. Such device is not
dangerous to your eyes, however do not look directly at the source of
the light (temporary blindness hazard).
WARNING. Do not look directly at the source of laser beam. It may
cause hazards. Follow the below safety rules.
• Use the laser device in accordance to the manufacturer’s
instructions.
• Do not, either intentionally or unintentionally, point the laser
beam at people, animals or any object other than processed
material.
• Do not bring to accidental pointing the laser beam at bystanders’
or animals’ eyes for a period longer than 0.25 second, for instance
by pointing the laser beam at mirrors.
GB