Vertiv SmartRow DCX, Руководство по установке

Страница: 3 / 74

TABLE OF CONTENTS
1 Important Safety Instructions 5
2 Glossary of Symbols 7
3 Introduction 9
3.1 Operational Overview 9
3.2 Vertiv™ SmartRow™ DCX Components 9
3.3 Liebert® CRV Notes 10
4 Application Guidelines 11
4.1 Environmental Conditions 11
4.2 Cooling System Design 11
4.3 Heat Load Calculation 13
4.4 Vertiv™ SmartRow™ DCX Equipment Placement within the Row 14
4.4.1 Cooling Unit and Rack Placement 14
4.4.2 UPS System 14
4.4.3 Row Length 15
4.5 IT Equipment Deployment and Wiring 15
4.6 Settings for the Vertiv™ Liebert® iCOM™ on the Liebert® CRV Cooling Unit 16
5 Preparation 17
5.1 Clearance Requirements 17
5.2 Inspection 17
5.3 Unloading the Vertiv™ SmartRow™ DCX 18
5.4 Required Setup Tools and Equipment 18
6 Installation 19
6.1 Assembly Sequence Overview 19
6.1.1 Staging the Vertiv™ SmartRow™ Equipment 19
6.1.2 Installing the Vertiv™ SmartRow™ Equipment 19
6.1.3 Connecting the Equipment 20
6.1.4 Installing Expansion Channels 20
6.1.5 Finalizing Installation 20
6.2 Optional Vertiv™ SmartRow™ DCX Control Panel and Fire Suppression System—Overview 20
6.3 Vertiv™ SmartRow™ DCX Control Panel and Fire Suppression System Component Locations 21
6.3.1 Control Panel and Fire Suppression System Component Operation 22
6.4 Recovering from EPO Circuit Activation 24
6.5 Recovering from a Fire Suppression System Activation 24
6.6 System Set-up and Commissioning 24
6.7 Fire Detection and Suppression System Operation Overview 25
6.8 Restarting after Vertiv™ SmartRow™ DCX Control Panel and Fire Suppression System Has Shut Down 25
7 Installation Checklist 27
7.1 Cooling and Power Component Installation Checklist 27
8 Troubleshooting 29
9 Maintenance 31
Vertiv | SmartRow™ DCX Installation Manual | 3