Vertiv NetSure V200D50, Инструкция по установке и эксплуатации

Страница: 10 / 32

Vertiv
| NetSure V200D50 DC Power Retrofit Installation & User Manual (UM486527803) | Rev. F
10
Typical Input Data: One (1) V200D50 Retrofit, 50 Hz input.
a) System output is initially adjusted to 54.48 volts DC as measured at the system sense point at 50% of
full load and nominal input. “Percent of Full Load” refers to percent of 180 Amperes.
Nominal
Input
Voltage
Percent
of Full
Load
Input
Current
(Amperes)
Input
VA
Input
Watts
Power
Factor
Efficiency
%
Heat
Dissipation
(BTU/Hr)
208
0 0.815 294 61 0.20 -- 211
25 7.410 2669 2607 97.66 94.68 473
50 14.320 5160 5126 99.36 95.67 757
75 21.500 7751 7731 99.74 95.57 1169
100 28.850 10403 10388 99.86 94.73 1869
110 31.280 11284 11269 99.88 94.30 2192
120 31.280 11280 11266 99.87 93.80 2383
240
0 0.895 373 61 0.16 -- 208
25 6.504 2709 2630 97.10 95.07 450
50 12.470 5195 5138.6 98.92 96.07 689
75 18.500 7706 7670 99.50 95.90 1071
100 24.890 10364 10338 99.74 95.20 1679
110 26.950 11220 11195 99.78 94.88 1954
120 26.940 11217 11190 99.76 94.40 2138
a) Maximum Input Current: at 100% of full load with output adjusted to 58 volts DC as measured at the
Retrofit output terminals, and input voltage as shown.
Nominal
Input Voltage
Input
Voltage
Input Current
(Amperes)
208/240 176 36.47