Vertiv™ NetSure™ External Distribution Box (EDB) Description and Installation Manual
Proprietary and Confidential © 2022 Vertiv Group Corp.
1
1
About this Document
This document provides description and installation instructions for Vertiv™ NetSure™ External Distribution Box (EDB); Spec. Nos.
F1011259, F1011265, and F1011266.
Procedures related to the provisioning, start-up, and acceptance of associated telecom equipment are not covered in this document.
Documents that supplement the information in this document are referenced in “Sequence of Procedures” on page 10.
2
Product Description
2.1
General
The Vertiv™ NetSure™ External Distribution Box (EDB) provides an enclosure housing two (2) DC distribution panels and alarm cards,
a fiber termination and storage chamber, and a cable entry chamber. Spec. No. F1011259 contains no Low Voltage Disconnect (LVD).
Spec. No. F1011265 contains a Low Voltage Disconnect (LVD) contactor on the left side DC distribution panel’s DC input. Spec. No.
F1011266 contains Low Voltage Disconnect (LVD) contactors on the left side and right side DC distribution panels’ DC input. See
Figure 2.1 for overall views of the enclosure.
The Vertiv™ NetSure™ External Distribution Box (EDB) is to be mounted on the side of a companion enclosure made of a minimum of
0.125-inch aluminum or 14-gauge galvanized steel. A companion enclosure is a Vertiv™ XTE series enclosure equipped with a Vertiv™
NetSure™ series power system.
2.2
Part Numbers
2.2.1
Enclosure
Refer to Table 2.1 for applicable product part numbers.
Table 2.1 Vertiv™ NetSure™ External Distribution Box (EDB) Part Numbers and Descriptions
Part Number
Description
F1011259
External Distribution Box (EDB) Providing DC Distribution and Fiber
Termination, No LVD.
F1011265
External Distribution Box (EDB) Providing DC Distribution and Fiber
Termination, One (1) LVD.
F1011266
External Distribution Box (EDB) Providing DC Distribution and Fiber
Termination, Two (2) LVDs.
F1011267
LVD Contactors Kit (Field Installed)
