Vertiv Liebert XDC, Руководство пользователя

Страница: 18 / 70

Mechanical Installation 11
While moving the indoor unit, keep the obliquity within the range of 75° to 105°, as shown in Figure 2-3 .
Figure 2-3 Handling Angle
2.3.2. Unpacking
The unit’s cabinet is packed with honeycomb cardboard and stretch film. After moving the unit to the place closest to the
final installation site, unpack it.
The unpacking procedures are as follows:
1. First remove the top cover and winding stretch film, then remove the honeycomb cardboard, as shown in
Figure 2-4 .
ITEMS DESCRIPTION ITEMS DESCRIPTION
1 Top cover 3 Honeycomb cardboard
2 Remove the top cover 4
First remove the winding stretch film and then
remove the honeycomb cardboard
Figure 2-4 Unpacking the Unit
2. Remove the bottom pallet, the unit is fixed on the bottom pallet with M8x20 and M8x80 screws (as shown in
Figure 2-5 ), and a 17 mm open wrench, ratchet wrench or socket can be used for disassembly.