Vertiv Liebert DPM, Руководство пользователя

Страница: 53 / 82

NOTE: If a fault or warning is enabled, touching even the Yes portion of the box will disable it. Disabling a fault or
warning will clear the threshold from the screen.
5. To change the threshold for a warning or fault, either drag the slider or touch the plus (+) or minus (-) sign at
either end of the slider.
a. Tapping either the plus (+) or minus (-) sign once will increase or decrease the threshold value by one
percentage point.
b. Holding either the plus or minus sign will move the threshold indicator continuously until the sign is
released.
7.1.2 Breaker Configuration: One-Line Diagram Links
To change a breaker's configuration with one-line diagram links:
1. Log in with Administrator access if PINs are required.
2. Touch STATUS and select the panelboard to be altered.
3. Touch Configuration . The screen, shown in Panelboard Configuration on page 48 permits changing the
component's name and rating, enabling or disabling related faults and warnings, resetting the fault and warning
thresholds, even clearing the panelboard of all breakers.
NOTE: The correct breaker can be chosen from the one-line diagram or, after Configuration has been touched, by
using the drop-down menu at the top left of the Touchscreen Control Panel.
Figure 7.2 Breaker Configuration
7 Add, Remove and Configure Components
49