Vertiv GXT4-10000RT230, Инструкция по установке и эксплуатации

Страница: 39 / 66

If a fault occurs, the UPS automatically switches to Bypass Mode. The original operating mode will be
maintained only in the case of a battery disconnection fault. The fault message alternates with UPS Mode
once a second, the red fault indicator on the operation and display panel lights up and the alarm sounds
continuously.
If a fault occurs:
1. Enter the ALARM CONTROL screen, and select
AUDIBLE ALAR M O N
or
AUDIBLE ALAR M O FF
to switch the alarm On or Off.
2. Enter the EVENT LOG screen, and select
VIEW LO G
to view the entire event log.
NOTE: There will be a short delay before the EVENT LOG screen displays the historical fault log to
allow the log to load.
Vertiv | Liebert GXT4 Installer/User Guide | 39