Vertiv GXT4-10000RT230, Инструкция по установке и эксплуатации, Страница: 34 / 66

4.4.1 Startup Screen
When the GXT4 is starting up, it initiates a self-test and displays the start-up screen about 10 seconds.
After about 10 seconds, the LCD shows one of the "On" screens. The screen shown depends on whether or
not input power is available.
• When input power is available: TURN ON UPS.
• When input power is not available: AC NOT AVAILABLE START ON BATTERY?
To turn On the UPS, press the Up or Down button to select
YES
and press the Enter button. The UPS will
start up, the LCD will display
UPS S T AR T IN G
and then
S T AR T S UCCES S FUL
after the UPS is turned On..
4.4.2 Default Screen
Press any button in the START SUCCESSFUL screen to enter the default interface.
NOTE: Values shown in the default screen will vary depending on installation and configuration.
In the default screen, the LCD shows the UPS model, output parameters, input parameters, battery
capacity with run time estimate and load percentage. The UPS operation mode (online/inverter, ECO,
Battery or Bypass) will be indicated by the LED indicators.
If no control button (ESC, Up, Down, Enter) is pressed for 2 minutes, the LCD will enter the screen-saver
mode (back light turns off). It will remain off until a control button is pressed.
4.4.3 Main Menu Screen
Press the Enter button in the default screen to enter the MAIN MENU screen.
To select a submenu, press the Up or Down button to move the cursor to the required item, then press the
Enter button to enter its submenu or set its parameter.
Menu options
STATUS Screen
In the MAIN MENU screen, select
S T AT US
to enter the Status Screen, displaying OUTPUT, LOAD,
INPUT, BATTERY and TIME SINCE STARTUP.
CONFIGURATION Screen
Select
MAIN MEN U > CO N FIGUR AT IO N
to enter the Configuration menu
In the CONFIGURATION screen, press the Up or Down button to move the cursor to the required
item, then press the Enter button to enter a submenu or set its parameters.
UPS Screen
Select
MAIN MEN U > CO N FIGUR AT IO N > UPS
to enter the UPS screen. This menu has six screens.
Press the Up or Down button to move the cursor to the required item, and press the Enter button to
confirm the settings.
Vertiv | Liebert GXT4 Installer/User Guide | 34