Modbus over IP configuration
MSS
44
User Manual 10H52252UMA0 - Rev. 2 - 09/2019
2.3.8
Connection Kit between UPS and MSS
In order to synchronize the UPS with the bypass line used to supply the MSS, connect the connection
kit as shown in Figure 2-7 and Figure 2-8, taking care to respect the phase sequence for the connection
points.
Figure 2-7 Connection kit between UPS and MSS - schematic diagram
Figure 2-8 Connection between MSS (on the left) and UPS (on the right)
Each UPS has to be connected to the MSS using the synchronization cables, to be ordered separately.
The length of the cable to be used depends on the distance between the MSS and the UPS.
