Vertilux VTi, Инструкция по программированию

Страница: 6 / 14

5
vertilux.com
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
UNLOCKED
BUTTON
OPPOSITE DIRECTION
BUTTON
RED AND BLUE
BUTTONS ARE
UNLOCKED
RELEASE
RED OR BLUE
BUTTON
5. On the wall control, press the stop button and
then release the button that was pressed on the
motor.
6. Test the red and blue buttons again. At this
time, both buttons should be able to emit a
"click" sound when pressed. Both buttons are
now unlocked, allowing for new limits to be set.
4. Press and hold the button that is unlocked on
the motor until you complete step 5. On the wall
control, press the button in the opposite direction
to that selected in step 1 and allow the motor to
operate until it stops on its own.
STOP
BUTTON
RED OR BLUE
BUTTON IS
UNLOCKED
STOP
BUTTON
DIRECTION
BUTTON
Follow the procedure described in either Case #1 or Case #2 depending on your situation:
Case #1: Both motor buttons, the red and the blue ones, do not “click” when pressed.
Make sure you release the mechanism. To do this, remove the track COVER located on the side of
the motor and remove the GEAR to release the mechanism (p. 2, fig. 2) .
Resetting the motor to factory default
1. On the
wall control
, press either direction
button until the motor stops on its own. If the
button you pressed does not start the motor, try
the opposite direction button . Remember which
direction button you selected in this step.
2. Press the stop button on the
wall control
.
3. Test the red and blue buttons again. At this
point one of them should be able to make a
"click" sound. That button is now unlocked.
The motor is now set to its factory default settings. Place the GEAR back. You can now follow the
procedure to adjust the limits (p. 3) .