Vertilux 6-700-CM-35R06, Инструкция по программированию

Страница: 3 / 20

2
vertilux.com
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
Initial programming sequence
Before starting...
White
Blue
Black
Brown
Green
Green I Yellow
Input Voltage Neutral Live Ground
120V AC
Series 6-700-CM- XXXXX
220V AC
Series 6-700-CN- XXXXX
Check that the motor is compatible with the associated brackets or accessories and that it is
correctly installed.
Switch off the power supply.
Connect the motor according to the information in the table below.
IMPORTANT: The limits must be preconfigured during the fabrication of the shade and not during the final installation.
¡Warning!
VTi
®
Celtic motors are weather resistant in a protected environment (ex.: covered terrace), but not
waterproof and therefore the motor head should not be exposed to direct rainfall.
KEEP AWAY FROM WATER LOWER CABLE LOOP AVOIDS WATER INFLOW
1
Pair the motor with the remote control.
2
Check the direction of rotation of the motor and
change it if needed.
3
Set upper and lower limits depending on the
installation requirements.
UP OR
DOWN?
• Adding an additional remote or “cloning” a channel
• Changing to tilt or jog mode
• Deleting a single motor or channel
• Unlinking the motor from the remote control
Optional functions