![background image](http://html1.mh-extra.com/html/vertilux/6-700-cm-35r06/6-700-cm-35r06_programming-instructions-manual_1007782006.webp)
5
Setting or modifying the upper limit
DOWN
BUTTON
UP
BUTTON
2.
Press the
down button
until the shade is below
the desired upper limit and then press the
up
button
to test the position of the new limit. Verify if
your current condition is the one described in
case
1
or
2
and perform the procedure again as needed
in each case until reaching the desired limit.
DOWN
BUTTON
2.
Press the
down button
until the shade is below
the desired upper limit and then press the
up
button
to test the position of the new limit. Verify if
your current condition is the one described in
case
1
or
2
and perform the procedure again as needed
in each case until reaching the desired limit.
UP
BUTTON
Press the
up button
on the remote control until
the motor stops. Check the current position of
the upper limit, and follow either procedure,
depending on your case.
If the current upper limit is above the desired
limit, follow the procedure below, depending on
the position of the motor.
Current limit
Desired upper limit
If the current upper limit is below the desired
limit, follow the procedure below, depending on
the position of the motor.
Current limit
Desired upper limit
1.
Rotate the hexdriver
clockwise “-”
to modify
the current upper limit.
MOTOR ON THE LEFT
MOTOR ON THE RIGHT
1.
Rotate the hexdriver
counter-clockwise
“+”
to
modify the current upper limit.
MOTOR ON THE LEFT
MOTOR ON THE RIGHT
CASE #1
CASE #2
Take into consideration:
7 full turns of the hexagonal grey or yellow limit setting screws equals to 1
turn of the motor tube.
UP
BUTTON
vertilux.com
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
Содержание 6-700-CM-35R06
Страница 20: ......