Vertilon AFBR-S4N44P163, Руководство пользователя

Страница: 15 / 24

User Guide
- 13 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886
/
Tel: (978) 692-7070 info@vertilon.com www.vertilon.com
Preamplifier
The anodes from each SiPM device in the array are bussed together and connected to the input of a single current-
sensitive preamplifier on the SIB916. The preamplifier generates a voltage signal in response to the current signal on its
input from any of the 16 SiPMs in the array. This voltage signal is available on an SMB output connector on the SIB916
and is also fed to the input of the discriminator. There are three settings for the preamplifier gain — low, medium, and
high — which are selected through the SIB916 configuration dialog box in the PhotoniQ graphical user interface shown
below.
Figure 7: SIB916 Dialog Box