Vertilon AFBR-S4N44P163, Руководство пользователя

Страница: 21 / 24

User Guide
- 19 -
Vertilon Corporation, 66 Tadmuck Road, Westford, MA 01886
/
Tel: (978) 692-7070 info@vertilon.com www.vertilon.com
Name Function Description
J1 IN A Coincidence Detector Input A
J2 IN B Coincidence Detector Input B
J3 JTAG JTAG interface (for factory use only)
J4 TRIG OUT Trigger output
J5 CHANNELS 1 - 16 Sensor interface board connector, PhotoniQ channels 1 through 16.
J6 DSCR OUT Discriminator output
J7 PREAMP Preamplifier output
J8 -HV External high voltage power input for bias to the SiPM array
TJ1 TEST Test input (for factory use only)
Table 3: Connectors
Name Function Description
LD1 STATUS Bicolor (red/yellow/green) LED indicator for SIB916 status.
SW1: 1-2 DEV ADDR 1:0 Sets the device address for control by the PhotoniQ. Set both switches to “ON”.
SW1: 3-4 DEV TYPE 1:0 Sets the device type for control by the PhotoniQ. Set both switches to “ON”.
Table 4: LEDs and Switches
Name Ref # Description
+5.0V P8 +5.0V power supply from the PhotoniQ
+3.3V P10 +3.3V internal power supply
+1.8V P9 +1.8V internal power supply
+2.5VREF P13 +2.5V reference voltage
VB P2 Bias voltage from PhotoniQ to SiPM anodes. Normally at +0.250V when PhotoniQ set to positive input polarity.
-HV P11 SiPM array common anode voltage.
Table 5: Test Points