Vertical Wave Phone Скачать руководство пользователя страница 90

Страница: 90 / 180

User Programmable Button (On the Phone or Console)

Using Wave Phone Features

Wave Phone User Guide

User Programmable Button (On the Phone or Console)

The following features can be set on the user programmable buttons:

In addition to choosing which feature is associated with an assigned button, you can also specify
select values for the keys.

Note:

Some phones may have a programmed button (usually named “

Program

”) available for

performing these programming tasks. Contact your Wave System Administrator for more
information about whether or not a “

Program

” button exists on your phone.

Using Programmable Keys [D]

DIGITAL PHONES

Programming a Feature Button

Note:

Not all feature keys are user programmable, thus you cannot edit a button that is not in

the above list. Display the feature information as described above to determine which keys are
available for programming.

In addition, some digital phones have a programmed “Program” button which takes you to the
same location on the display as steps 2 and 3. See “Program Button” on page 6-25

From an idle phone:

Decide which button you want to program.

Press the

softkey on the display.

Press

until

PROG

appears, then press the corresponding button.

Press

until the desired feature is displayed, then press the corresponding

button.

Press the button you wish to program.

If additional options are available (such as an extension for

User Forward

or Blind

Transfer for

DSS/BLF

) you will be prompted at this point to enter the information.

Press

SPEAKER

to clear the display.

To Clear a Feature Button

Follow the above steps, and program the button as “Unassigned”.

• Autodial

• Extension Pickup

• Save/Repeat

• Call Return

• Group Pickup

• System Speed

• Camp-on

• Headset

• Unassigned

• Do Not Disturb

• Privacy

• User Forward

• DSS/BLF

• Restrict

• Voicecall

Release 1.5 SP2

June 2009

Содержание Wave Phone





















































































































































































Результаты поиска

Содержание Wave Phone

Отзывы:

Похожие инструкции для Wave Phone

Бренды по названию

Популярные бренды

Vertical Wave Phone, Руководство пользователя

Результаты поиска

Содержание Wave Phone

Отзывы:

Похожие инструкции для Wave Phone

Бренды по названию

Популярные бренды