Vertical Wave Phone Скачать руководство пользователя страница 83

Страница: 83 / 180

Speed Dial

Using Wave Phone Features

Wave Phone User Guide

Using System Speed Dial [D] / [A]

Depending on the feature button’s programming, System Speed Dial may work in one of three
ways:

•

System Speed Dial

- the

System Dial

button programming does not contain an index, and

the Preview option is not selected

•

System Speed Dial with a programmed number

- the

System Dial

button is

programmed with a default index to use. The index number consists of a three-digit
number that represents an actual phone number to be dialed.

•

System Speed Dial with dialing preview (phone models with displays only)

- the

System Dial

button is programmed with the Preview option selected. If a default index is

programmed, the browsing of the list will begin at that number. If not, it will begin at the
last index viewed.

DIGITAL PHONES

To Use System Speed Dial with a Pre-programmed Number

Press

System Dial

The programmed number will be dialed.

To Use System Speed Dial with a Index Numbers

Press pre-programmed

System Dial

Depending upon the program of the phones in your system, a prompt for an index number
to be entered will be displayed.

If your phone doesn’t have a programmed

System Dial

button, press *89.

Enter the speed dial index number (from 001 to 999) that corresponds to the
phone number you want to dial.

The number associated with the index number is displayed on the phone, and is dialed as
soon as you enter the last digit of the index.

ANALOG PHONES

Dial frequently used phone numbers using a predefined three-digit code.

Note:

Ask your System Administrator for the list of available defined speed dial numbers.

To Use a Speed Dial Number

Listen for the dial tone.

Press

*89

Dial assigned speed dial number.

Release 1.5 SP2

June 2009

Содержание Wave Phone





















































































































































































Результаты поиска

Содержание Wave Phone

Отзывы:

Похожие инструкции для Wave Phone

Бренды по названию

Популярные бренды

Vertical Wave Phone, Руководство пользователя

Результаты поиска

Содержание Wave Phone

Отзывы:

Похожие инструкции для Wave Phone

Бренды по названию

Популярные бренды