Vertical Edge 9200 Series Phone
User Guide
8
2.
On the right side of
the phone, remove
the DSS cover.
3.
Align the DSS and
phone as shown in
the drawing.
4.
Push the DSS into
the phone until the
DSS is fully engaged.
5.
Insert the screws
provided through the screw tabs in the DSS and tighten the
screws into the phone. Do not over-tighten.
1.7 Edge 9200 Series Phone Installation
1.7.1 Phone Connections
Edge 9200 series have 3 connection ports (refer to following
figure). each port is for connecting to: Handset, Ear Mic., and the
line cable.
1) Connect the telephone cord (curly cord) to the handset and
the other end to the handset jack at the bottom of the
telephone.
2) Connect the line cable to the port at the bottom of telephone
and the other end to thewall socket.
3) Connect the Ear Mic. to the jack at the bottom of the
telephone. To use Ear Mic. function, press [PGM] +19 and
then set ON.
Figure Edge 9200 series Connections
