VXA-220 P
RO
VI O
PERATING
M
ANUAL
40
M
ENU
(
“S
ET
”
)
M
ODE
[
SQL
]
Function
: Squelch Level Setting.
Available Values
: 0 ~ 8
Default Setting
: 6
Select a setting for this Menu item which just silences the
receiver when no signal is present. Use the lowest setting
which will keep the receiver quiet between incoming trans-
missions.
[
MCLR
]
Function
: Memory Channel Clear (“MR” memory only).
To clear a Memory channel:
Select the Menu Item MCLR.
Press the [
ENT
(
)] key, then rotate the
DIAL
se-
lector knob to recall the memory channel to be erased.
Press the [
ENT
(
)] key to clear the Memory chan-
nel (the Memory channel number will return to “001”).
Important Notice
: An “erased” channel cannot be restored,
and “CH-001” cannot be erased, as it is used for “Priority
Channel” operation.
[
RESM
]
Function
: Scan-Resume Mode Setting.
Available Values
: 5S/CAR
Default Setting
: 5S
“5S” (5-Second Pause) mode:
the scanner will halt for five seconds only, after which
scanning will resume (whether or not the other sta-
tion is still transmitting).
“CAR” (Carrier Drop) mode:
the scanner will remain halted for as long as there is a
carrier present on the channel; after the carrier drops
at the end of the other station’s transmission, the scan-
ning will resume.
[
SCNL
]
Function
: Scan Lamp On/Off (while paused).
Available Values
: on/oFF
Default Setting
: on
If you set this function to “on,” the lamp will be illumi-
nated whenever the scanner pauses. The lamp will go off
automatically when scanning resumes.
[
BEEP
]
Function
: Keypad Beeper On/Off.
Available Values
: on/oFF
Default Setting
: on
Содержание VXA-220
