VXA-220 P
RO
VI O
PERATING
M
ANUAL
31
The
VXA-220
’s automatic scanner is not operational in
the NAV band (108.000 - 117.975 MHz), because the NAV
stations (ILS, etc.) transmit constantly (thereby causing
the scanner to stop repeatedly). However, you can scan
manually in the NAV band, per the following procedure:
Press and hold the [
(
SET
)] key for 2 seconds to
start the manual scanner. Scanning will continue as
long as the key is depressed.
Release the [
(
SET
)] key to stop the manual scan-
ner immediately.
Note
: When scanning upward in frequency, when the fre-
quency reaches the COM Band (118.000 - 136.975 MHz)
via manual scanning, the
VXA-220
will switch to the au-
tomatic scanner mode.
Channel-Skip Scanning
Continuous-carrier stations like ATIS (Automatic Termi-
nal Information Service) or Weather Broadcast stations
inhibit scanner operation. Since these stations are always
active, the scanner will be halted repeatedly on their chan-
nels. Such channels can be set to be “skipped” during
Memory scanning (MR, Book or WX modes), if you like,
so as not to interfere with automatic channel scanning:
Recall the Memory Channel to be skipped during
scanning.
Press the [
F
] key fol-
lowed by the [
9
(
SKIP
)]
key. The “
SKIP
” icon
will appear on the dis-
play, indicating that the
channel is to be ignored
during scanning.
You can also designate a
channel to be skipped
while scanning. When the
receiver is halted on a
channel that you wish to skip, press and hold the
[
(
SET
)] key for 2 seconds (the “
SKIP
” icon will
appear next to the channel to be skipped).
Later, to re-enable the memory channel for scanning,
repeat the first two steps. The “
SKIP
” icon will dis-
appear by the channel you have just re-enabled.
Note
: A memory set to be “skipped” is still accessible for
manual memory selection using the
DIAL
selector knob
or [
]/[
] key, if you change a function of
DIAL
and
[
]/[
] key by pressing the [
F
] key followed by the
[
5
(
DIAL/
)] key.
S
CANNING
O
PERATION
F
Содержание VXA-220
