Vertex Standard VX-820E Series, Руководство по эксплуатации

Страница: 26 / 32

24
VX-820E S
EriES
O
pErating
M
anual
sql
You can manually adjust the squelch level using this
function:
r
Press the assigned programmable key. A tone will
sound, and the current squelch level will appear
on the display.
r
Press the MONITOR/LAMP button to select the
desired squelch level.
r
Two seconds after releasing the MONITOR/
LAMP button, the display will revert to the nor-
mal channel indication.
aF m
in
V
r
Press the assigned programmable key to reduce the
audio output to the (lower) level programmed by your
Dealer.
s
tatus
s
Et
(
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to change the
5-Tone status code. To change the status code, select
the desired digit by [ A
] key, then change the number
by [ B
]/[
C
] key, and store the number by [
D
] key.
s
tatus
u
p
/D
oWn
(
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to select a
5-Tone status code from the pre-defined status list.
a
DVanCED
o
pEration
s
tatus
C
hECK
Press the assigned programmable key to check the
5-Tone receive status code. When you press this key,
the LCD display will indicate the “Message” corre-
sponding to the receive status condition per the pre-
defined status list.
l
onE
W
orKEr
Press the assigned programmable key to toggle the
Lone Worker feature “On” and “Off”. The Lone
Worker feature is designed to emit an alarm for 30
seconds when the Lone Worker Timer (programmed
by your Dealer) has expired. If the user does not re-
set the timer by pressing the PTT switch, the radio
switches to the Emergency mode.
DtmF C
oDE
s
Et (
16-
KEy
V
Ersion only
)
You may send the desired telephone number manu-
ally.
To dial a number manually, press the assigned pro-
grammable key, then press the desired numbers on the
front panel’s numeric key. Now, press the PTT switch
to send the telephone number. The DTMF tones
sent during the dialing sequence will be heard in the
speaker.