Vertex Standard VX-820E Series, Руководство по эксплуатации

Страница: 25 / 32

23
VX-820E S
EriES
O
pErating
M
anual
o
ption
sW2
Press the assigned programmable key to toggle the
optional accessory “2” “On” and “Off”.
E
mErgEnCy
The
VX-820E
series include an “Emergency” feature
which may be useful for alerting another party moni-
toring on the same frequency as your transceiver’s
channel.
Press the assigned programmable key to initiate an
emergency call. For further details contact your Dealer.
h
omE (
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to recall the
pre-defined Home group/channel. When you recall the
Home group/channel, the “ ” notation will appear
on the LCD.
s
ElECtaBlE
t
onE (
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to select a sub-
audible tone (CTCSS/DCS) from the pre-defined tone
table. You can operate using the indicated sub-audible
tone in the Selectable Tone mode.
D
irECt
Ch#1 - #4
(
16-
KEy
& 4-
KEy
V
Ersion only
)
Press the assigned programmable key to recall the
Dealer pre-programmed channel directly.
a
DVanCED
o
pEration
rEC/play
(
V
oiCE
s
toragE
: r
EquirEs thE
DVs-5
)
This function allows your radio to record a received
voice message, and to play back the recorded audio. It
requires installation of the optional Voice Recording
Unit.
Recording ;
Press the assigned programmable key for 1.5 seconds
to enable the Voice Recording Mode. If the incoming
signal is received, so as to un-mute the squelch and
pass audio, the received audio will be recorded.
In the 16-key and 4-key versions, the “ ” Icon will
flash while recording and the “ ” stays on when the
voice recording is completed.
Playback ;
Press the assigned programmable key momentarily to
play back the last message.
To stop the play-back, press the TOP SEL key.
In the 16-key and 4-key versions, while playback is
proceeding, you may press the [ A
] key (4-key ver-
sion) or [
Ý
] key (16-key version) to jump to the pre-
vious message, or press the [ B
] key (4-key version) or
[
#
] key (16-key version) to jump to the next message.
Furthermore, press the [ D
] key to clear the all mes-
sages and stop the play-back.