Vertex Standard VX-456, Руководство по эксплуатации

Страница: 19 / 44

VX-456 O
perating
M
anual
17
NOTE

The selected channel is kept even when the
transceiver is turned off.

The “CH-05” and “CH-35” channels are
used for the Emergency, and the 5-Tone
Sequential System is not available on these
channels. The 5-Tone Sequential System
comes to be usable via CE144 Program-
ming Software.

The “CH-22” and “CH-23” channels are
used for telemetry and telecommand appli-
cations, so the voice communications are
not available on these channels.

The 5-Tone Sequential System is restricted
the transmission for two time in a minute.
If you try to transmit over three times, a
beeper will sound and does not transmit
the 5-Tone Sequential code.

You may customize the key function of the
VX-456 via the CE144 Programming Soft-
ware.
arts
TM
(
a
uto
r
ange
t
ranspond
s
Ystem
)
This system is designed to inform you when you and
another ARTS
TM
-equipped station are within com-
munication range.
In a channel enabling the ARTS
TM
operation, when
the radio receives an incoming ARTS
TM
signal, a
short beep will sound, and “ IN SERV ” (“In Ser-
vice”) will be indicated on the display for 2 seconds.
If you move out of range for more than two minutes,
your radio senses that no signal has been received;
a short triple-beep will sound, and “
OUT SERV
”
(“Out of Service”) will be displayed on the display
for 2 seconds. If you subsequently move back into
communication range, as soon as the other station
transmits, a short beep will sound and “
IN SERV
”
will be indicated again on the display for 2 seconds.
o
peratIon