Vertex Standard VX-456, Руководство по эксплуатации, Страница: 16 / 44

VX-456 O
perating
M
anual
14
o
peratIon
Preliminary Steps
r
Install a charged battery
pack onto the transceiver,
as described previously.
r
Screw the supplied an-
tenna onto the Antenna
jack.
Never attempt to operate
this transceiver without
an antenna connected.
r
If you have a Speaker/Microphone, we recom-
mend that it not be connected until you are fa-
miliar with the basic operation of the
VX-456 .
Operation Quick Start
r
Turn the top panel’s
V O L / P W R k n o b
clockwise to turn the
radio on.
r
Turn the top panel’s
CH selector knob to
choose the desired
operating channel. The
channel number will
appear on the LCD.
r
If you want to select the operating channel from
a different Channel Group, press the [ D
] key
repeatedly to select the Channel Group you want
before selecting the operating channel. A Group
number will appear on the LCD whenever the
Programmable key is pressed.
IMPORTANT NOTE
Water resistance of the transceiver (IP57: 1
meter / 30 minutes) is assured only when the
following conditions:
r
Battery pack is attached to the transceiver;
r
Antenna is connected to the antenna jack;
r
and MIC/SP cap is installed in the MIC/
SP
jack.