Vertex Standard VX-456, Руководство по эксплуатации

Страница: 22 / 44

VX-456 O
perating
M
anual
20
l
ocK
(
Press and hold the SIDE-2 key
)
Press and hold the [
SIDE-2
] key to lock the
CH
se-
lector knob, Programmable Keys, and PTT switch.
In the Lock mode, the display will show “
-LOCK-
”
when you rotate the CH selector knob or touch the
Programmable Keys or
PTT
switch (Of course, you
may cancel the Lock mode by pressing and holding
the [
SIDE-2
] key).
s
can
(
Press the
[
A
]
key
)
The Scanning feature is used to monitor multiple
channels programmed into the transceiver. While
scanning, the radio will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
r
To activate scanning, press the [ A
] key.
The scanner will search the channels, looking
for active ones; it will pause each time it finds a
channel on which someone is speaking.
r
To stop scanning, press the [ A
] key again.
Operation will revert to the channel to which the
CH
selector knob is set.
s
can
s
et
(
Press and hold the
[
A
]
key
)
Scan Set feature allows the user to arrange a custom
scan.
Press and hold the [
A
] key to delete/restore the cur-
rent channel to/from your scanning list.
r
When you delete a stored channel, “
SCN SKIP
”
will appear on the display for one second after
you press the [
A
] key; the “ ” icon will, in turn
disappear.
r
When you restore a channel, “ SCN SET ” will
appear on the display for one second after you
press the [
A
] key, and the “ ” icon will now ap-
pear.
a
dvanced
o
peratIon