3
Operating Manual Reprint
r
To transmit, press and hold
in the
PTT
switch. Speak
into the microphone area
of the front panel grille
(lower left-hand corner) in
a normal voice level. To re-
turn to the Receive mode, release the
PTT
switch.
r
If a Speaker/Microphone is available, remove the plas-
tic cap and its two mounting screws from the right side
of the transceiver, then insert the plug from the Speaker/
Microphone into the
MIC/SP
jack; secure the plug us-
ing the screws supplied with the Speaker/Microphone.
Hold the speaker grille up next to your ear while re-
ceiving. To transmit, press the
PTT
switch on the
Speaker/Microphone, just as you would on the main
transceiver’s body.
Note
:
Save the original plastic cap and its mounting screws.
They should be re-installed when not using the
Speaker/Microphone.
Key Functions
The
VX-210A
provides a programmable “
ACC
” (Accessory)
button. The
ACC
button’s functions can be customized (set to
any of a variety of functions), via programming by your
VER-
TEX STANDARD
dealer, to meet your communications/net-
work requirements. The particular function to be activated or
disabled may require a simple press of the
ACC
button, or it
may require that the
ACC
button be pressed and held in for one
second (or more). See the discussion below.
Some features may require the purchase and installation of
optional internal accessories.
The possible
ACC
button programming features are illustrated
below, and their functions are explained in the next chapter. For
further details, contact your
VERTEX STANDARD
dealer.
For future reference, check the box next to the function that
has been assigned to the
ACC
button on your particular radio,
and keep it handy.
Description of Operating Functions
Monitor
Press the
ACC
button to override (disable) the Tone Squelch.
Background noise or incoming signals will now be
heard whether or not a matching tone is present on the
signal. Press the
ACC
button once more to resume nor-
mal (quiet) Tone Squelch action.
Squelch OFF
Press the
ACC
button to override both the Noise and
Tone squelch systems. Again press the
ACC
button to
resume normal (quiet) Noise and Tone squelch action.
Low Power
Press the
ACC
button to set the radio's transmitter to
the “Low Power” mode, thus extending battery life.
Press the
ACC
button again to return to “High Power”
operation when in difficult terrain.
Scan
The Scanning feature is used to monitor multiple chan-
nels programmed into the transceiver. While scanning,
the radio will check each channel for the presence of a
signal, and will stop on a channel if a signal is present.
r
To activate scanning:
Press the
ACC
button.
The scanner will search the channels, looking for
“active” ones; it will pause each time it finds a chan-
nel on which someone is speaking.
r
To stop scanning:
Press the
ACC
button.
Operation will revert to the channel to which the
CH
knob is set.
Follow-Me Scan
“Follow-Me” Scan feature checks a User-assigned Pri-
ority Channel regularly as you scan the other channels.
Thus, if only Channels 1, 3, and 5 (of the 8 available chan-
nels) are designated for “Scanning,” the user may none-
theless assign Channel as the “User-assigned” Priority
Channel via the “Follow-Me” feature.
Press the
ACC
button to activate “Follow-Me” scanning,
then
pull and turn
the
CH
selector knob to the channel
which you want to designate as the “User-Assigned Pri-
ority Channel”. When the scanner stops on an “active”
channel, the User-assigned Priority Channel will auto-
matically be checked every few seconds.
Dual Watch
The Dual Watch feature is similar to the Scan feature,
except that only two channels are monitored: the cur-
rent operating channel, and the “Priority” channel.
r
To activate Dual Watch:
Press the ACC button.
The scanner will search the two channels; it will
pause each time it finds a channel on which some-
one is speaking.
Function
ACC
button
Press
Press and Hold
None
Monitor
Squelch OFF
Low Power
Scan
Follow-me Scan
Dual Watch
Talk Around
Call/Reset
Speed Dial
TX Save Off
ACC 1
ACC 2
Содержание VX-210AU
Страница 8: ...8 Block Diagram ...
Страница 14: ...MAIN Unit 14 Note ...
Страница 18: ...MAIN Unit Lot 12 18 Note ...
Страница 22: ...MAIN Unit Lot 20 22 Note ...