6
Cloning
The
VX-160E/-180E
includes a convenient Cloning feature, which allows the programming data from one transceiver
to be transferred to another
VX-160E/-180E
. Here is the procedure for Cloning one radio's data to another.
Optional Cloning Cable
CT-27
1. Turn both transceivers off.
2. Remove the plastic cap and its two mounting screws
from the
MIC/SP
jack on the right side of the trans-
ceiver. Do this for both transceivers.
3. Connect the optional
CT-27
cloning cable between the
MIC/SP
jacks of the two transceivers.
4. Press and hold in the
PTT
and
MONITOR
switches
(just below the PTT switch) while turning the trans-
ceiver on. Do this for both transceivers (the order of
the switch-on does not matter). “
CLONE
CLONE
CLONE
CLONE
CLONE
” will appear
on the displays (for the
VX-180E
) of both transceiv-
ers when Clone mode is successfully activated in this
step; in the case of the
VX-160E
, no change will be
observed at this point.
5. On the Destination transceiver, press the
MONITOR
switch. “
LOADING
LOADING
LOADING
LOADING
LOADING
” will appear on the LCD (for
VX-
180E
; for
VX-160E
, the
TX/BUSY
indicator on the
top of the radio will glow Green).
6. Press the
PTT
switch on the source transceiver; “
SEND-
SEND-
SEND-
SEND-
SEND-
ING
ING
ING
ING
ING
” will appear on the Source transceiver (for
VX-
180E
; for
VX-160E
, the
TX/BUSY
indicator on the
top of the radio will glow Red), and the data will be
transferred.
7. If there is a problem during the cloning process, “
ER-
ER-
ER-
ER-
ER-
ROR
ROR
ROR
ROR
ROR
” will appear on the LCD (for
VX-180E
; for
VX-
160E
, the
TX/BUSY
indicator on the top of the radio
will blink Red); check your cable connections and bat-
tery voltage, and try again.
8. If the data transfer is successful, the display will return
to “
CLONE
CLONE
CLONE
CLONE
CLONE
” (for
VX-180E
; for
VX-160E
, the
TX/
BUSY
indicator on the top of the radio will turn off).
Turn both transceivers off and disconnect the
CT-27
cable. You can then turn the transceivers back on, and
begin normal operation.
9. Replace the plastic cap and its two mounting screws.
All manuals and user guides at all-guides.com
all-guides.com
Содержание VX-160EU
