1
2.4GHz Digital Wireless A/V/Data Transmitter and Receiver KIT
USER MANUAL
MODEL: 15-2400DK
1. Key Features
Offer a wireless link solution audio/video/data signals connection.
2.4 GHz frequency hopping spread spectrum module and supported max. 25 Auto
hopping channels for resisting interferences to other 2.4G devices.
100mW RF output (Average).
Point to point mode only.
MPEG-4 (D1) standard video compression and stereo audio inputs.
5-bit ID pairing key for security.
Max. 250 meters (light-of-sight)
2. Panel View
15-2400DT
15-2400DR
①
.
DC 12V IN:
DC 12V power input.
②
.
RS-485 I/O:
2-wire half-duplex RS-485 supported.
③
.
AUDIO I/O:
RCA female connectors for the stereo audio signal.
④
.
VIDEO I/O:
BNC female for the analog CVBS video signal.
⑤
.
POWER ON or RF LINK LED:
Indications
Power/RF LINK LED
Power On
On
RF Link Loss
Low Flashing
⑥
.
RS-485 LED:
Indicated to RS485 data are transmitted or received
⑦
.
ID Setting:
ID setting is use for paring with 15-2400DK transmitter and receiver each other.
It must be make a same ID code first before you setup the devices.
⑧
.
BAUD RATE and TERMINATION
: Baud rate and 120 Ohm termination setting by DIP switch.
(
Note
: After changing the baud rate setting by DIP switch, please re-boot the device again.)
⑨
.
ANT:
SMA connector for connected to 2.4 GHz antennas.
○
1
○
2
○
3
○
4
○
5
○
6
○
9
○
7
○
8
