Vertex Standard VX-1400, Руководство по эксплуатации

Страница: 23 / 56

21 VX-1400 O
PERATING
M
ANUAL
frequency (receive frequency vs transmission frequency) will appear on the display.
Press the [
]/[ ] (move the digit) and [ ]/[ ] (select the number) button to im-
prove the sound of the incoming signal. These
buttons functions does not affect your transmis-
sion frequency; only the receive frequency is
being adjusted (up to ±1.000 kHz). Press and hold in
both [
] and [ ] buttons for
one second to reset the offset.
Important Note : The transceiver can not transmit while adjusting the clarifier offset.
If you wish to transmit, press the [
CLAR
] button again to return to normal display.
Press the [
CLAR
] button again to return to normal display. When the receiving fre-
quency is higher than displayed frequency, the
“
” icon will appear in the upper side of the
frequency display. Similarly, when the receiv-
ing frequency is lower than displayed frequency, the “
” icon will appear in the
upper side of the frequency display.
Important Note : Keep offset frequency until you change the operating frequency or
reset the offset by pressing and holding both [
] and [ ] buttons for one second.
If the LCD display is too bright, press the [ DIM
] button (the [
P
ROGRAMMABLE
] button
which assigns the “Dimmer” function: the factory default is [
S1
] button) to reduce
the display brightness. Press the [
DIM
] button again return to the LCD display to
nominal brightness level.
Press the Programmable Function ([
P0
] ~ [
P4
], [
S1
] & [
S2
]) buttons to activate the
function which is corresponding with that button. Refer to page 42 for the details of
the Programmable Function button.
R
ECEPTION
O
PERATION